IN-14 Shield for Arduino Nixie Tubes Clock on a Beech Wooden Stand [RGB, USB, Musical] [with Columns and Sockets] [Temp. sensor, GPS Receiver, IR Remote]

Units Sold: 21

 

Shield Nixie Clock on Beech Wooden Stand with Columns
Designed for 6 IN-14 xUSSR Nixie Tubes with Sockets
IN-14 Tubes are the most popular mass-produced Nixie Tubes
Nixie Clocks are one of the most beautiful and popular Vintage Clocks
Clock features Startup Tune, RGB backlight, USB port for updates
External Temperature sensor with 3.5 mm jack included with the Clock
Accessories include Temp. sensor, GPS Receiver and IR Remote
Nixie Clock is designed for Arduino UNO and MEGA 2560 Control Boards
It allows you to write your own unique programs for the Arduino platform
All the latest source codes are always available on our GitHub channel
PCB, Design, Schematics, Case and Software made by GRA & AFCH

 

 

$89.95

Clear

IN-14 Shield for Arduino Nixie Tubes Clock on a Beech Wooden Stand with Columns and Sockets

 

Shield Nixie Clock on Beech Wooden Stand with Columns
Designed for 6 IN-14 xUSSR Nixie Tubes with Sockets
IN-14 Tubes are the most popular mass-produced Nixie Tubes
Nixie Clocks are one of the most beautiful and popular Vintage Clocks
Clock features Startup Tune, RGB backlight, USB port for updates
External Temperature sensor with 3.5 mm jack included with the Clock
Accessories include Temp. sensor, GPS Receiver and IR Remote
Nixie Clock is designed for Arduino UNO and MEGA 2560 Control Boards
It allows you to write your own unique programs for the Arduino platform
All the latest source codes are always available on our GitHub channel
PCB, Design, Schematics, Case and Software made by GRA & AFCH

 

 

 

Listing includes:

 

  • Shield Nixie Clock on Beech Wooden Stand
  • IN-14 Nixie Tubes [6 pcs Set] (optional, choose in selector)
  • Socket pins for Nixie Tubes (Set for 6 Tubes) (optional, choose in selector)
  • Glass Columns with two Neon Dots [2 pcs] (optional, choose in selector)
  • Arduino Control Board (UNO or MEGA 2560) (optional, choose in selector)
  • Temperature sensor (DS18B20) (included, internal with PH2.0 connector)
  • Operating instruction on vintage-style paper

 

We offer optional Accessories as separate Items:

Temperature Sensor DS18B20 with Jack 3.5mm for Arduino Shields

GPS Receiver GA-6

IR Remote Controller RM-X153

 

Dear customers!
If you have ANY questions, PLEASE ASK us.

 

 

Our Benefits

 

  • Easy to build beautiful clock – we offer housing
  • A special socket (Options) for each pin IN-14 – Easy to change tubes
  • Easy to customize firmware under Your own needs, thanks to an open platform – Arduino
  • Fast uploading via USB
  • The latest version of the firmware always available on GitHub
  • No need to download drivers – we are use only Genuine USB to serial converters.
    Drivers for them pre-installed in all popular OS: Windows, MacOS, Linux
  • Human friendly menu
  • Very high qualty of Printed Circuit Boards
  • Japan alluminium capacitors
  • Power-On Self-Test
  • Technical support

 

Software Features

 

  • Time format: [HH:MM:SS]
  • Hour format: [12/24] (changable)
  • Date format: [DD:MM:YY]
  • Fully static display mode with maximum possible brightness of the Tubes
  • Automatic information update on the Tubes
  • Unique RGB LED backlight with 16,7 million colors
  • Selection of color for backlight LED or cycle through all spectrum
  • Switching the backlight LED on/off in the matter of seconds
  • Changeable RTTTL (Nokia format) sound melodies (included: Mission Impossible, We Wish You…)
  • Updatable Firmware via USB using Arduino IDE software
  • Slot Machine effect (antipoisoning – Tubes lifetime saving function)
  • Separate control for Upper and Lower Dots
  • Power-On Self-Test (POST) using Tubes, LED backlight, Sound showing firmware version at the end
  • Detailed Tubes test that checks each segment on every Tube
  • Temperature display in Celsius or Fahrenheit (optional, if Temp. sensor present)

 

Hardware Features

 

  • Integrated adjustable High Voltage Power supply: 150–220 V
  • 3 PWM channels for RGB LEDs, 8 bit per channel: 24bit, 16,7 million colors
  • Test Points for diagnostic, adjusting and control of Low and High voltage circuits
  • Internal buzzer
  • Real Time Clock (RTC) (DS3231SN) with Backup battery
  • Onboard 3-buttons controls
  • IR Receiver (TSOP4836) for IR Remote (works best with Arduino Mega)
  • Temperature sensor (DS18B20) connector with 1-wire protocol
  • 8 pcs RGB SMD backlight LEDs
  • SPI up to 4Mhz
  • PCB wirings for 2 Columns with 2 neon lamps each (Dots)
  • Reverse polarity protection
  • Power consumption, projected: 11-14 VDC, 750 mA, operational: 12 VDC, no less than 1A
  • Power supply connector dimensions: 5.5 x 2.1 mm (center pin is positive “+”)
  • Nixie Tubes Clock dimensions (without tubes): (312x 110x 90) mm / (12.28 x 4.33 x 3.54) inch

 

IN-14 Arduino Shield Nixie Tubes Clock on a Beech Wooden Stand by GRA & AFCH

 

 

IN-14 Arduino Shield Nixie Tubes Clock on a Wooden Stand by GRA & AFCH

 

 

Operating Instruction

 

 

Dear customers!
If you have ANY questions, PLEASE ASK us.

 

Shipping and Return information

 

All Items are shipped from Ukraine
Via International registered Airmail
Shipments are made within 1 business day
After the payments are received and verified
It takes about 4-7 days via UPS Express delivery
It takes about 10-18 days via Standard shipping
It takes about 35-45 days via Economy shipping
We combine multiple Items to save on shipping

 

 

 

UPS Express Shipping time (recommended):

Europe: 3-5 days
Germany: 3-5 days
USA, Canada: 4-7 days
Asia, South America: 5-7 days
Australia, New Zealand: 5-7 days
Africa, Central America: 5-7 days

 

 

Standard Shipping time:

Europe: 10-12 days
Germany: 10-12 days
USA, Canada: 10-15 days
Asia, South America: 10-18 days
Australia, New Zealand: 12-18 days
Africa, Central America: 12-18 days

 

 

Economy Shipping time:

Europe: 25-30 days
Germany: 25-30 days
USA, Canada: 30-35 days
Asia, South America: 35-45 days
Australia, New Zealand: 45-55 days
Africa, Central America: 45-55 days

 

 

Return Policy

All Returns are accepted

  • For Return you should contact Us within 14 Days after receiving the Item
  • Refunds are made as Money back or Replacements (buyer’s choice)
  • Return Shipments are paid by the buyer
  • No restocking fees are charged

 

 

Customs Policy

We as a seller do not receive from the buyer any charges any sales taxes and handling fees.
In any case we are not responsible for Tax(VAT) or any other Import duties or any other equivalent fees that arises upon delivery.
Please consult with your local Customs legislation and visit your local Customs department or website before making any purchases.

 

 

Downloads

 

Operating Instruction: IN-14 Shield Nixie Tubes Clock

Shield Tubes Board files repository: IN-14 Shield Nixie Clock NCS314 Series Tubes Board

Firmware repository: IN-14 Shield Nixie Tubes Clock

Arduino Drivers repository: Shield Nixie Tubes Clocks USB drivers

 


 

You may also like…