NCS314 v2.2 how to control LEDs

Nixie Tubes Clocks | Shields for Arduino Clocks | Raspberry Pi HAT Nixie Clocks | DIY KITs for Nixie Clocks | Cases for Nixie Clocks | Nixie Tubes | RF Units | Assembled Boards | Bare PCBs | Components | Spare Parts | Circuits | Firmwares… › Forums › Questions and answers about PRODUCTS › NCS314 v2.2 how to control LEDs

This topic contains 2 replies, has 2 voices, and was last updated by  ccie_3611 4 years, 11 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 12.01.2020 at 07:41 #25846

    ccie_3611
    Participant

    https://github.com/afch/NixieClockRaspberryPi
    the CLITool and DisplayNixie do not have a way to control the LEDs under the nixie tubes.
    Is there a tool to control them or documentation on the API to control them ?

    13.01.2020 at 16:10 #25854

    Gra Afch
    Keymaster

    Hello.

    The LEDs under the Tubes can be controlled with use of back panel buttons.
    Please refer to User Manual for the commands on LEDs.

    Universal Manual for NIXIE Tubes Clocks based on NCM107 or NCM109 boards

    Regards.

    16.01.2020 at 22:51 #26000

    ccie_3611
    Participant

    thanks for the reply / info however the buttons seem to do nothing. No matter what button I push or hold down nothing changes. I have a Raspberry Pi connected and its displaying the time just fine so the board seems ok.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.