NCS314-8C v2.2 10/09/2018 problem on nixie lit on

Nixie Tubes Clocks | Shields for Arduino Clocks | Raspberry Pi HAT Nixie Clocks | DIY KITs for Nixie Clocks | Cases for Nixie Clocks | Nixie Tubes | RF Units | Assembled Boards | Bare PCBs | Components | Spare Parts | Circuits | Firmwares… › Forums › Questions and answers about PRODUCTS › NCS314-8C v2.2 10/09/2018 problem on nixie lit on

This topic contains 2 replies, has 2 voices, and was last updated by  sacbns 4 years, 10 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 08.02.2020 at 17:04 #27208

    sacbns
    Participant

    My watch worked perfect for 1 year.
    now the nixie numbers are all lit, plus the led and the pink panther music is ok

    ok arduino
    12v ok
    05v ok
    180v ok

    I need help please

    10.02.2020 at 16:33 #27212

    Gra Afch
    Keymaster

    Hello Bruno.

    It seems like you need to reload the firmware to your Arduino Shield board.
    Please use link to our GitHub channel to download the correct firmware:
    https://github.com/afch/NixeTubesShieldNCS314_8C

    Also please use reference video for compiling and uploading the firmware to the Clock:

    If this will not solve the problem, write back.
    Regards.

    10.02.2020 at 20:02 #27213

    sacbns
    Participant

    thanks for the reply, but it didn’t work.
    remembering that it worked perfectly for almost 1 year
    and I see that this problem is recurring in the forum.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.