DIY KIT for IN-12 Arduino Shield NCS312 Nixie Tubes Clock with a Clear Acrylic Stand [RGB, USB, Musical] [with Sockets] [Tubes, Arduino, Power Supply] [Temp. sensor, GPS time sync., IR Remote]

Units Sold: 37

 

DIY KIT for IN-12 Shield Nixie Clock with a Clear Acrylic Stand
Designed for 6 IN-12 (A\B) xUSSR Nixie Tubes with Sockets
IN-12 Tubes are one of the most popular mass-produced Nixie Tubes
Nixie Clocks are one of the most beautiful and popular Vintage Clocks
Clock features Startup Tune, RGB backlight, USB port for updates
Shield features Sockets and options include Tubes, Power Supply
Accessories include Temp. sensor, GPS Receiver and Remote
Shield Clock is designed for Arduino UNO and MEGA 2560 Boards
It allows you to write your own uniqe programs for the Arduino platform
All the latest Source codes are always available on our GitHub channel
PCB, Design, Schematics, Case and Software made by GRA & AFCH

 

$59.95$148.95

Clear

DIY KIT for IN-12 Arduino Shield NCS312 Nixie Tubes Clock with a Clear Acrylic Stand with Sockets

 

DIY KIT for IN-12 Shield Nixie Clock with a Clear Acrylic Stand
Designed for 6 IN-12 (A\B) xUSSR Nixie Tubes with Sockets
IN-12 Tubes are one of the most popular mass-produced Nixie Tubes
Nixie Clocks are one of the most beautiful and popular Vintage Clocks
Clock features Startup Tune, RGB backlight, USB port for updates
Shield features Sockets and options include Tubes, Power Supply
Accessories include Temp. sensor, GPS Receiver and Remote
Shield Clock is designed for Arduino UNO and MEGA 2560 Boards
It allows you to write your own uniqe programs for the Arduino platform
All the latest Source codes are always available on our GitHub channel
PCB, Design, Schematics, Case and Software made by GRA & AFCH

 

 

 

 

Listing includes:

 

  • Tubes Shield NCS312 Board Bare PCB
  • Set of Electronic Parts and Components for Shield NCS312 Tubes Board
  • Set of Hex Spacers and Screws for Shield NCS312 and Arduino Boards
  • Set of Socket Pins for 6 IN-12 Nixie Tubes (optional, choose in selector)
  • NE2H Neon Bulbs for Dots – 5 pcs (4 Neons for Dots and one spare)
  • IN-12 Nixie Tubes – 6 pcs Set (optional, choose in selector)
  • Arduino Control Board – (UNO or MEGA 2560) (optional, choose in selector)
  • Power Supply (12V, 1A) (US, EU, UK, AU) (optional AC plug, choose in selector)
  • Clear Acrylic Stand for Shield NCS312 Nixie Clock (included with the KIT)
  • Principal Electrical Sheme for Shield NCS312 Tubes Board
  • BOM List for Shield NCS312 Tubes Board
  • User Manual on vintage style paper

 

Shield Board features Socket pins for Nixie Tubes

Arduino Control Board is optional for the KIT

Power Supply is optional for the KIT

Clear Acrylic Stand included with the KIT

 

Nixie Clock support usage of basic Accessory – Temperature sensor
Arduino Shield Clock support usage of advanced Accessories: GPS Receiver and IR Remote (with Arduino MEGA)

 

 

 

We offer optional Accessories for Arduino Shield Clocks:

 

 

Dear customers!
If you have ANY questions, PLEASE ASK us.

 

 

Our Benefits:

 

  • All our Nixie Tubes Clocks are using HV513WG chips,
    it provides higher brightness in multiplexing mode in comparison with HV5812 chip and greater reliability compared to legacy K155ID1
  • We offer flexible Tubes Boards platform, that support many Nixie Tubes
    (out Tubes Boards designed for IN-4, IN-8, IN-8-2, IN-12, IN-14, IN-16, IN-17, IN-18 and Z573, Z5660M, ZM1042, Z568M Nixie Tubes)
  • It is easy to build a beautiful Nixie Tubes Clock with our Boards, we also offer Acrylic, Wooden and Stone Cases for our Clocks
  • Fast uploading pf the Firmware via USB to the Control Board
  • All the latest version of the Firmwares to all our Nixie Clocks are always available on our GitHub channel
  • No need for additional drivers, we are using only genuine USB-to-serial converters (FTDI),
    drivers for them are pre-installed in all popular OSes: Windows, MacOS, Linux
  • It is easy to modify the Nixie Clock’s Firmware functions for your tasks due to the open Arduino platform
  • We use High Quality PCBs and Components, also we use Japanese aluminum capacitors only for our Boards (Nichicon, Panasonic)
  • Tubes Board is easy to modify by cutting if you want to build 4 Tubes Clock [HH:MM] from 6 Tubes Clock
  • Our Nixie Boards use Power On Self-Test (POST): LED backlight flashing,Tubes flashing and Start up Tune. Our Boards use,
    Firmware version can be seen at the end of the POST test
  • Our Tubes Boards use Unique detailed Tube test – our soft test checks each Tubes segment on every Tube so it distinguishable to see segments failures
  • We provide competent technical support for all our products

 

 

Software Features:

  • Shield supports IN-12 Nixie tubes – 6 pcs.
  • Date format: [DD:MM:YY]; 12/24 hour format: [HH:MM:SS].
  • Full static display mode.
  • Slot Machine (Anti poisoning – tubes saving function. Increases the service life).
  • Temperature measurement [Celsius or Fahrenheit]. Digital temperature sensor (DS18B20, optional  not included).
  • GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 V power supply, optional, choose in selector).
  • Operation via IR remote control (Remote control Sony RM-X151, optional not included).
  • Automatic information refreshing on the tubes.
  • The maximum possible brightness of the tubes.
  • Unique RGB LED backlight with 16,7 million colors. Your can choose any constant color off backlight LED and memorize it. Or you have option for a cyclic full spectrum color change!
  • Switching on/off LED backlight in the matter of seconds.
  • As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it. (included songs: Mission Impossible, We Wish You…).
  • Easy updating firmware via USB using Arduino IDE.
  • Power On Self-Test (POST): LED backlight, tubes and sound. You can check firmware version at the end. Unique detailed tube test – our soft check each segment on every lamp. Distinguishable to see segment failure.

Hardware Features:

  • Highly Accurate RTC (Real Time Clock) DS3231SN with backup battery.
  • Integrated high voltage power supply: 150 – 220V.
  • High voltage adjusting potentiometer.
  • 3 control buttons on board.
  • 8 pcs RGB SMD LEDs.
  • 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (see manual).
  • Internal buzzer.
  • Test points for testing, adjusting and controlling low and high voltage circuits.
  • Plug for optional external GPS receiver  (only with Arduino Mega).
  • IR receiver TSOP4836 for optional IR remote controllers (In case of using Arduino UNO, they may conflict with “Tone” library). If you plan to use remote control, we strongly recommend the using of Arduino MEGA – works fluently.
  • 3 pin connector for optional Temperature sensor (DS18B20; 1-Wire protocol).
  • SPI up to 4MHz.
  • Places for 2 column with 2 neon dots (digits separator).
  • Independent controls for upper and lower dots.
  • Power consumption: 12V, 760mA. Recommended: 12 VDC, not less than 1A. Power supply connector dimensions: 5.5 x 2.1mm (center pin positive “+”).
  • Reverse polarity protection.
  • Nixie Tubes Shield NCS312 PCB size: 180mm x 53.34mm. (7.09 x 1.2 in)

Actual photos of KIT:

Boards Dimensions in 2D and 3D

Our Benefits:

  • Easy to build beautiful clock – we also offer the case.
  • Easy to customize firmware under Your own needs, thanks to an open platform – Arduino.
  • Fast uploading via USB.
  • The latest version of the firmware always available on GitHub.
  • No need for additional drivers – we are use only Genuine USB to serial converters (FTDI). Drivers for them are pre-installed in all popular OS: Windows, MacOS, Linux.
  • Human friendly menu.
  • Very high qualty PCB.
  • Japan aluminium capacitors.
  • Complete Power On Self-Test (POST): LED backlight, tubes and sound. Unique circumstantial tube test.
  • Competent Technical support.

Nixie Tubes Clock Shield for Arduino NCS312 – Photo Gallery:

This is example of assembled board NCS312 – complete Set

The base listing contains only BARE PCB and full set of electronics parts (Arduino, Columns and Power Supply are EXCLUDED from set).

User Manual

 

 

 

Dear customers!
If you have ANY questions, PLEASE ASK us.

 

 

 

Shipping and Return information

 

All Items are shipped from Ukraine
Via International registered Airmail
Shipments are made within 1 business day
After the payments are received and verified
It takes about 4-7 days via UPS Express delivery
It takes about 10-18 days via Standard shipping
It takes about 35-45 days via Economy shipping
We combine multiple Items to save on shipping

 

 

 

UPS Express Shipping time (recommended):

Europe: 3-5 days
Germany: 3-5 days
USA, Canada: 4-7 days
Asia, South America: 5-7 days
Australia, New Zealand: 5-7 days
Africa, Central America: 5-7 days

 

 

Standard Shipping time:

Europe: 10-12 days
Germany: 10-12 days
USA, Canada: 10-15 days
Asia, South America: 10-18 days
Australia, New Zealand: 12-18 days
Africa, Central America: 12-18 days

 

 

Economy Shipping time:

Europe: 25-30 days
Germany: 25-30 days
USA, Canada: 30-35 days
Asia, South America: 35-45 days
Australia, New Zealand: 45-55 days
Africa, Central America: 45-55 days

 

 

Return Policy

All Returns are accepted

  • For Return you should contact Us within 14 Days after receiving the Item
  • Refunds are made as Money back or Replacements (buyer’s choice)
  • Return Shipments are paid by the buyer
  • No restocking fees are charged

 

 

Customs Policy

We as a seller do not receive from the buyer any charges any sales taxes and handling fees.
In any case we are not responsible for Tax(VAT) or any other Import duties or any other equivalent fees that arises upon delivery.
Please consult with your local Customs legislation and visit your local Customs department or website before making any purchases.

 

 

Downloads

Firmware Shield Board NCS314 (Shield for NIXIE CLOCKS)

Drivers USB for PC Drivers 

Schemes Shield Board NCS314 (Shield for NIXIE CLOCKS)

Manual Universal Manual for NIXIE Tubes Clocks 

3D model in STEP format Shield Board NCS314 (Shield for NIXIE CLOCKS)

You may also like…

  • Arduino MEGA 2560 [for Shield Boards]

     

    The Arduino MEGA 2560 is a Control Board for Shield Tubes and DDS Boards

    Nixie Shield Boards are compatible with Arduino UNO and MEGA 2560 Control Boards

    DDS Shield Boards are compatible with Arduino UNO and MEGA 2560 Control Boards

    Hundreds of thousands of Arduino Boards are already fueling people’s creativity all over the world everyday

    Arduino platform allows you to write your own unique programs on it

    The latest sources are always available on our afch Github repository

    PCB Design Schematics Case and Software made by GRA & AFCH

     

     

  • GPS Receiver GA-6

    This GPS Receiver ideal for any Nixie Clock Shield by GRA & AFCH together with Arduino Mega.

    $27.95 Add to cart
  • IR Remote Controller RM-X153

    This Remote controller ideal for any Nixie Clock Shield by GRA & AFCH.

  • Power Supply adapter for GRA & AFCH Nixie Clocks (US, EU, UK, AU plug) 230-100 AC to 12 DC \ 1A

    Power Supply for Nixie Tubes Clock 12V\1A   These Power Supplies are ideal for all of GRA & AFCH Nixie Tubes Clocks. With selector (on top of screen) choose right plug for your region. We offer Power Supplies for all types of wall outlets.   Photos of Power Supplies: for US (US): for Europe (EU): […]

  • Arduino UNO [for Shield Nixie Clocks]

    The Arduino UNO is a Control Board for Shield Tubes Boards

    Nixie Clock Shield Tubes Boards are compatible with Arduino UNO and MEGA 2560 Control Boards

    Hundreds of thousands of Arduino Boards are already fueling people’s creativity all over the world everyday

    PCB, Design, Schematics, Case and Software made by GRA & AFCH

    Arduino platform allows you to write your own unique programs on it

    The latest sources are always available on our Afch Github repository

  • Column for IN-8 IN-8-2 IN-14 Z570 Z573

    Glass Column with 2 NE-2H Neons as Dots for IN-8/IN-8-2/IN-14/Z570/Z573 Clocks [1 piece]

     

    Glass separating Column with NE-2H Neon Dots
    Designed for “Divergence Meter Mini” Nixie Tubes Clock
    Glass Column with two NE-2H Neons and Holder with screws
    Most of Gra & Afch KITs use glass Columns with separating Neon Dots
    PCB, Design, Schematics, Case and Software made by GRA & AFCH

     

     

    $13.95 Add to cart
  • Temperature Sensor DS18B20 with Jack 3.5mm for Arduino Shields

    This Temperature sensor ideal for any Nixie Clock Shield by GRA & AFCH together with Arduino Mega.

  • IN-12A Nixie Tubes [6 pcs]

    Rare xUSSR IN-12A Nixie Tube.
    Nixie Clocks and many other devices use these Tubes.
    All tubes are Unused in excellent condition.
    All tubes are tested and 100% working.
    All tubes has OTK sign!

    $65.95 Add to cart
  • IN-12B Nixie Tubes [6 pcs]

    Rare xUSSR IN-12B Nixie Tube.
    Nixie Clocks and many other devices use these Tubes.
    All tubes are Unused in excellent condition.
    All tubes are tested and 100% working.
    All tubes has OTK sign!

    $65.95 Add to cart