DIY KIT for Z568M Large Shield Nixie Clock with Sockets and Dots [SMF, RGB, USB, Tunes] (Tubes) (Columns) (Arduino) (Temp. sensor, GPS Receiver, IR Remote) (Power Supply)
Units Sold: 4
Project “Divergence Meter”
DIY KIT for R|Z568M Shield Nixie Clock
Arduino Shield Nixie Clock with Columns
Designed for 6 R|Z568M / Z568M Nixie Tubes with Sockets
R|Z568M Tubes are the biggest mass-produced Nixie Tubes
Nixie Clocks are one of the most beautiful and popular Vintage Clocks
Clock features Startup Tune, RGB backlight, USB port for updates
Shield features Sockets and options include Tubes, Columns, Power Supply
Accessories include Temp. sensor, GPS Receiver, IR Remote
Shield Clock is designed for Arduino UNO and MEGA 2560 Boards
It allows you to write your own uniqe programs for the Arduino platform
All the latest Source codes are always available on our GitHub channel
PCB, Design, Schematics, Case and Software made by GRA & AFCH
DIY KIT for Z568M Large Shield Nixie Tubes Clock with Sockets and Dots
Project “Divergence Meter”
DIY KIT for R|Z568M Shield Nixie Clock
Arduino Shield Nixie Clock with Columns
Designed for 6 R|Z568M / Z568M Nixie Tubes with Sockets
R|Z568M Tubes are the biggest mass-produced Nixie Tubes
Nixie Clocks are one of the most beautiful and popular Vintage Clocks
Clock features Startup Tune, RGB backlight, USB port for updates
Shield features Sockets and options include Tubes, Columns, Power Supply
Accessories include Temp. sensor, GPS Receiver, IR Remote
Shield Clock is designed for Arduino UNO and MEGA 2560 Boards
It allows you to write your own unique programs for the Arduino platform
All the latest Source codes are always available on our GitHub channel
PCB, Design, Schematics, Case and Software made by GRA & AFCH
Listing includes:
- Shield Tubes Board NCS3568-6 bare PCB
- Set of electronic Parts and Components for Shield Tubes Board NCS3568-6
- Set of hex Spacers and Screws for Shield Tubes Board NCS3568-6
with Arduino Control Board [UNO or MEGA 2560] - NE-2H Neon Dots [2 pcs] (with one spare) (included with the KIT)
- Z568M Large Nixie Tubes [6 Tubes Set] (optional, choose in selector)
- Sockets for Tubes [for 6 Tubes] [slim pins] (included with the KIT)
- NE-2H Neon Dots [2 pcs] (additional) (included with Columns)
- Columns for Dots [2 pcs] [100mm] (optional, choose in selector)
- Arduino Control Board [UNO or MEGA 2560] (optional, choose in selector)
- Temperature sensor [DS18B20] [PH2.0 plug] (included with the KIT)
- Temperature sensor [DS18B20] [3.5mm jack] (optional, choose in selector)
- GPS Receiver [GA-6] [3.5mm jack] (requires Arduino MEGA 2560) (optional, choose in selector)
- IR Remote [RMX153R] [IR] (requires Arduino MEGA 2560) (optional, choose in selector)
- Power Supply [15V/1.5A] [US, EU, UK, AU] [AC plug] (optional, choose in selector)
- Principal electrical Scheme for Shield Tubes Board NCS3568-6
- BOM (Bill of Materials) List for Shield Tubes Board NCS3568-6
- Operating Instruction on vintage-style paper
Shield Board include Socket pins for Nixie Tubes
Columns with separating Dots are optional for the KIT
Arduino Control Board is optional for the KIT
Power Supply is optional for the KIT
NCS3568-6 Arduino Shield is fully compatible with Dalibor Farny R|Z568M Nixie Tubes
Nixie Clock support usage of basic Accessory – Temperature sensor
Arduino Shield Clock support usage of advanced Accessories: GPS Receiver and IR Remote (with Arduino MEGA)
We offer optional Accessories for Arduino Shield Clocks:
If you have ANY questions, PLEASE ASK us.
Our Benefits:
- All our Nixie Tubes Clocks are using HV513WG chips,
it provides higher brightness in multiplexing mode in comparison with HV5812 chip and greater reliability compared to legacy K155ID1 - We offer flexible Tubes Boards platform, that support many Nixie Tubes
(out Tubes Boards designed for IN-4, IN-8, IN-8-2, IN-12, IN-14, IN-16, IN-17, IN-18 and Z573, Z5660M, ZM1042, Z568M Nixie Tubes) - It is easy to build a beautiful Nixie Tubes Clock with our Boards, we also offer Acrylic, Wooden and Stone Cases for our Clocks
- Fast uploading pf the Firmware via USB to the Control Board
- All the latest version of the Firmwares to all our Nixie Clocks are always available on our GitHub channel
- No need for additional drivers, we are using only genuine USB-to-serial converters (FTDI),
drivers for them are pre-installed in all popular OSes: Windows, MacOS, Linux - It is easy to modify the Nixie Clock’s Firmware functions for your tasks due to the open Arduino platform
- We use High Quality PCBs and Components, also we use Japanese aluminum capacitors only for our Boards (Nichicon, Panasonic)
- Tubes Board is easy to modify by cutting if you want to build 4 Tubes Clock [HH:MM] from 6 Tubes Clock
- Our Nixie Boards use Power On Self-Test (POST): LED backlight flashing,Tubes flashing and Start up Tune. Our Boards use,
Firmware version can be seen at the end of the POST test - Our Tubes Boards use Unique detailed Tube test – our soft test checks each Tubes segment on every Tube so it distinguishable to see segments failures
- We provide competent technical support for all our products
Software Features:
- Clock uses EXTRA Large Z568 Nixie Tubes – 6 pcs.
- Date format: [DD:MM]; 12/24 hour format: [HH:MM].
- Full static display mode. The maximum possible brightness of the tubes.
- Slot Machine (Anti poisoning – tubes saving function. Increases the service life).
- Temperature measurement [Celsius or Fahrenheit] (optional – choose in selector).
- GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 V power supply, optional – choose in selector).
- IR remote controls (Remote control model Sony RM-X151/RM-X153, optional – choose in selector). IR protocol SIRC or any protocol if you able to implement it.
- Automatic update information on the tubes.
- Unique RGB LED backlight with 16,7 million colors. Your can choose any constant color off backlight LED and memorize it. Or you have option for a cyclic full spectrum color change!
- Switching on/off LED backlight in the matter of seconds.
- As alarm sound clock uses standard RTTTL (Nokia format) melodies, so you can easily change it (included songs: Mission Impossible, We Wish You…).
- Easy updating firmware via USB using Arduino IDE.
- Power On Self-Test (POST): LED backlight, tubes and sound. You can check firmware version at the end. Unique detailed tube test – our soft check each segment on every lamp. Distinguishable to see segment failure.
Hardware Features:
- Highly Accurate RTC (Real Time Clock) DS3231SN with backup battery.
- Integrated adjustable High Voltage Power supply: 150 – 220 V.
- High voltage adjusting potentiometer.
- 3 control buttons on board.
- 8 pcs WS2812B Addressable RGB LED, Independent color adjustment for each Tube (6 for Tubes, 2 for Columns)
- High quality PCB and components. We use Japanese aluminum capacitors only (Nichicon, Panasonic).
- Internal buzzer.
- Test points for testing, adjusting and controlling low and high voltage circuits.
- Plug for optional external GPS receiver (only with Arduino Mega).
- IR receiver TSOP4836 for optional IR remote controllers (In case of using Arduino UNO, they may conflict with “Tone” library). If you plan to use remote control, we strongly recommend the using of Arduino MEGA – works fluently.
- 3 pin connector for optional Temperature sensor (DS18B20; 1-Wire protocol).
- Plug for optional external GPS receiver.
- SPI up to 4Mhz.
- Place for 2 Columns with 2 neon dots (digits separator).
- Independent controls for upper and lower dots.
- Power consumption: 12-15 VDC, 2000 mA. Recommended: 12 VDC, not less than 2A.
- Reverse polarity protection.
- Z568 Nixie Tubes Clock dimensions (without Tubes): 470(L) x 20(H) x 83(W) mm.
Assembled R|Z568 Arduino Shield EXTRA Large 6 Tubes Nixie Clock with Columns gallery:
Nixie Tubes Clock Arduino Shield NCS3568-6 Electrical Schematic:
Operating Instruction
If you have ANY questions, PLEASE ASK us.
Shipping and Return information
All Items are shipped from Ukraine
Via International registered Airmail
Shipments are made within 1 business day
After the payments are received and verified
It takes about 4-7 days via UPS Express delivery
It takes about 10-18 days via Standard shipping
It takes about 35-45 days via Economy shipping
We combine multiple Items to save on shipping
UPS Express Shipping time (recommended):
Europe: | 3-5 days |
Germany: | 3-5 days |
USA, Canada: | 4-7 days |
Asia, South America: | 5-7 days |
Australia, New Zealand: | 5-7 days |
Africa, Central America: | 5-7 days |
Standard Shipping time:
Europe: | 10-12 days |
Germany: | 10-12 days |
USA, Canada: | 10-15 days |
Asia, South America: | 10-18 days |
Australia, New Zealand: | 12-18 days |
Africa, Central America: | 12-18 days |
Economy Shipping time:
Europe: | 25-30 days |
Germany: | 25-30 days |
USA, Canada: | 30-35 days |
Asia, South America: | 35-45 days |
Australia, New Zealand: | 45-55 days |
Africa, Central America: | 45-55 days |
Return Policy
All Returns are accepted
- For Return you should contact Us within 14 Days after receiving the Item
- Refunds are made as Money back or Replacements (buyer’s choice)
- Return Shipments are paid by the buyer
- No restocking fees are charged
Customs Policy
We as a seller do not receive from the buyer any charges any sales taxes and handling fees.
In any case we are not responsible for Tax(VAT) or any other Import duties or any other equivalent fees that arises upon delivery.
Please consult with your local Customs legislation and visit your local Customs department or website before making any purchases.
Downloads
Operating Instruction: Z568M Shield Nixie Tubes Clock
Shield Tubes Board files repository: Z568M Shield Nixie Clock NCS3568-6 Series Tubes Board
Firmware repository: Z568M Shield Nixie Tubes Clock
Arduino Drivers repository: Shield Nixie Tubes Clocks USB drivers
You may also like…
Arduino MEGA 2560 Control Board [for Shield Boards]
The Arduino MEGA 2560 is a Control Board for Shield Tubes and DDS Boards
Nixie Shield Boards are compatible with Arduino UNO and MEGA 2560 Control Boards
DDS Shield Boards are compatible with Arduino UNO and MEGA 2560 Control Boards
Hundreds of thousands of Arduino Boards are already fueling people’s creativity all over the world everyday
Arduino platform allows you to write your own unique programs on it
The latest sources are always available on our afch Github repository
PCB Design Schematics Case and Software made by GRA & AFCH
$33.95 Select optionsIR Remote [RM-X153R]
This Remote controller ideal for any Nixie Clock Shield by GRA & AFCH.
$14.95 Add to cartArduino UNO Control Board [for Shield Tubes Boards]
The Arduino UNO is a Control Board for Shield Tubes Boards
Nixie Clock Shield Tubes Boards are compatible with Arduino UNO and MEGA 2560 Control Boards
Hundreds of thousands of Arduino Boards are already fueling people’s creativity all over the world everyday
PCB, Design, Schematics, Case and Software made by GRA & AFCH
Arduino platform allows you to write your own unique programs on it
The latest sources are always available on our Afch Github repository
$18.95 Select optionsTemperature Sensor DS18B20 with Jack 3.5mm for Arduino Shields
This Temperature sensor ideal for any Nixie Clock Shield by GRA & AFCH together with Arduino Mega.
$14.95 Add to cartGPS Receiver GA-6
This GPS Receiver ideal for any Nixie Clock Shield by GRA & AFCH together with Arduino Mega.
$29.95 Add to cart