#2 digit always on?

Nixie Tubes Clocks | Shields for Arduino Clocks | Raspberry Pi HAT Nixie Clocks | DIY KITs for Nixie Clocks | Cases for Nixie Clocks | Nixie Tubes | RF Units | Assembled Boards | Bare PCBs | Components | Spare Parts | Circuits | Firmwares… › Forums › Questions and answers about PRODUCTS › #2 digit always on?

This topic contains 1 reply, has 2 voices, and was last updated by  Gra Afch 4 years, 7 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 25.05.2020 at 06:13 #31206

    lockywhite
    Participant

    I’ve recently finished building my NI-8-2 divergence meter kit. On first power up noticed the #2 in tube 1,3 and 5 is always lit. Does this sound like a software tweak or a hardware problem?
    Any help would be appreciated thanks

    25.05.2020 at 15:41 #31208

    Gra Afch
    Keymaster

    Hello.

    Please check for any short circuits on the Bottom Control NCM109 Board.
    Also make sure no Tubes pins are shorting any elements on the Boattom Board.
    Please also use e-mail fominalec@gmail.com and provide pictures of your assembly for visual inspection.

    Regards.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.