NCS312-6 PCB Fault

Nixie Tubes Clocks | Shields for Arduino Clocks | Raspberry Pi HAT Nixie Clocks | DIY KITs for Nixie Clocks | Cases for Nixie Clocks | Nixie Tubes | RF Units | Assembled Boards | Bare PCBs | Components | Spare Parts | Circuits | Firmwares… › Forums › Questions and answers about PRODUCTS › NCS312-6 PCB Fault

Tagged: 

This topic contains 2 replies, has 2 voices, and was last updated by  knittedape 6 months, 4 weeks ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 01.03.2024 at 00:41 #48937

    knittedape
    Participant

    I have an NCS312 v1.5 which worked correctly for approx 3 weeks. Now when I turn it on all tubes light up all digits whilst looking ‘blurred’ at the same. The board looks fine, no loose or missing solder and no scorch or heat marks. Has been reflashed, current versions etc.
    TP3 – 4.90v
    TP1 – 11.46v
    Dout1 + 2 – 11.46v
    SCK – 0.60
    SCK0 – 11.46v
    LE – 0.84v
    MOSI – 0.60v
    Happy to post images of the board if needed.
    Thanks in advance!

    10.03.2024 at 20:57 #49047

    avidflyer
    Participant

    I’m having almost an identical issue as this but see that no one has offered any help! Hey ‘gra & afch’ perhaps you can shine a little light here especially as you have, as you proudly proclaim, shifted over 7k of these.

    27.05.2024 at 23:53 #56302

    knittedape
    Participant

    knittedape@gmail.com

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.