Tubes quit illuminating after 1/2 day

Nixie Tubes Clocks | Shields for Arduino Clocks | Raspberry Pi HAT Nixie Clocks | DIY KITs for Nixie Clocks | Cases for Nixie Clocks | Nixie Tubes | RF Units | Assembled Boards | Bare PCBs | Components | Spare Parts | Circuits | Firmwares… › Forums › Questions and answers about PRODUCTS › Tubes quit illuminating after 1/2 day

This topic contains 2 replies, has 2 voices, and was last updated by  realcomeau 4 years ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 30.11.2020 at 00:15 #35926

    Jase
    Participant

    all tubes worked great and each element illuminated properly for about 1/2 day of it being turned on. programing seemed to be working properly also with LEDs and sound. After a few hours of it being on constantly all of the tubes ceased illumination completely. LED’s and sound continue to work without issue. What would i look at as the failure?

    30.11.2020 at 00:20 #35927

    Jase
    Participant

    IN-14 shield divergence meter

    30.11.2020 at 00:23 #35928

    realcomeau
    Participant

    This is a kit that you built? Please check the voltages at the test points and report the results.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.