Shield Nixie Clock in Acrylic Case with Columns

Designed for 9 IN-14+IN-19A xUSSR Nixie Tubes with Sockets

IN-14 Tubes are the most popular mass-produced Nixie Tubes

Nixie Clocks are one of the most beautiful and popular Vintage Clocks

Clock features Startup Tune, RGB backlight, USB port for updates

External Temperature sensor with PH2.0 connector included with the Clock

Accessories include Temp. sensor, GPS Receiver and IR Remote

Nixie Clock is designed for Arduino UNO and MEGA 2560 Boards

It allows you to write your own unique programs for the Arduino platform

All the latest Source codes are always available on our GitHub channel

PCB, Design, Schematics, Case and Software made by GRA & AFCH

Listing includes:

• Shield Nixie Clock with Columns and Arduino in Clear Acrylic Case
• IN-14+IN-19A Nixie Tubes [9 Tubes Set] (optional, choose in selector)
  (Tubes may be soldered or socketed depending on the Shield Tubes Board)
• Temperature sensor [DS18B20] [PH2.0 plug] (included with the Clock)
• Temperature sensor [DS18B20] [3.5mm jack] (optional, choose in selector)
• GPS Receiver [GA-6] [3.5mm jack] (optional, choose in selector)
• IR Remote [RMX153R] [IR] (optional, choose in selector)
• Power Supply [DC 12V/1A] [US, EU, UK, AU] (included, optional AC plug)
• Operating Instruction on vintage-style paper

Temperature sensor with PH2.0 connector is included with the Clock

Power Supply is included with the Clock

We offer optional accessories for Arduino Nixie Clocks:

Temperature Sensor DS18B20 with PH2.0-3p connector for Arduino Shields

Our Benefits:

• All our Nixie Tubes Clocks are using HV513WG chips,
  it provides higher brightness in multiplexing mode in comparison with HV5812 chip and greater reliability compared to legacy K155ID1
• We offer flexible Tubes Boards platform, that support many Nixie Tubes
  (out Tubes Boards designed for IN-4, IN-8, IN-8-2, IN-12, IN-14, IN-16, IN-17, IN-18 and Z573, Z5660M, ZM1042, Z568M Nixie Tubes)
• It is easy to build a beautiful Nixie Tubes Clock with our Boards, we also offer Acrylic, Wooden and Stone Cases for our Clocks
• Fast uploading pf the Firmware via USB to the Control Board
• All the latest version of the Firmwares to all our Nixie Clocks are always available on our GitHub channel
• No need for additional drivers, we are using only genuine USB-to-serial converters (FTDI),
  drivers for them are pre-installed in all popular OSes: Windows, MacOS, Linux
• It is easy to modify the Nixie Clock’s Firmware functions for your tasks due to the open Arduino platform
• We use High Quality PCBs and Components, also we use Japanese aluminum capacitors only for our Boards (Nichicon, Panasonic)
• Tubes Board is easy to modify by cutting if you want to build 4 Tubes Clock [HH:MM] from 6 Tubes Clock
• Our Nixie Boards use Power On Self-Test (POST): LED backlight flashing,Tubes flashing and Start up Tune. Our Boards use,
  Firmware version can be seen at the end of the POST test
• Our Tubes Boards use Unique detailed Tube test – our soft test checks each Tubes segment on every Tube so it distinguishable to see segments failures
• We provide competent technical support for all our products

Software Features:

• Shield supports IN-14 Nixie tubes – 8 pcs + IN-19 Symbolic Nixie tubes – 1pc
• Date format: [DD:MM:YY]; 12/24 hour format: [HH:MM:SS].
• Full static display mode.
• Slot Machine (Anti poisoning – tubes saving function. Increases the service life).
• Temperature measurement [Celsius or Fahrenheit]. Digital temperature sensor (DS18B20, optional  not included).
• GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 V power supply, optional, choose in selector).
• Operation via IR remote control (Remote control Sony RM-X151, optional not included).
• Automatic information refreshing on the tubes.
• The maximum possible brightness of the tubes.
• Unique RGB LED backlight with 16,7 million colors. Your can choose any constant color off backlight LED and memorize it. Or you have option for a cyclic full spectrum color change!
• As alarm sound clock uses standard RTTTL (Nokia format) melodies, so you can easily change it (included songs: Mission Impossible, We Wish You…).
• Easy updating firmware via USB using Arduino IDE.
• Power On Self-Test (POST): LED backlight, tubes and sound. You can check firmware version at the end. Unique detailed tube test – our soft check each segment on every lamp. Distinguishable to see segment failure.

Hardware Features:

• Highly accurate RTC (Real Time Clock) DS3231SN with backup battery.
• Integrated high voltage power supply: 150 – 220V.
• High voltage adjusting potentiometer.
• 3 control buttons on board.
• 8 pcs RGB SMD LEDs.
• 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (please check the manual).
• Internal buzzer.
• Test points for testing, adjusting and controlling low and high voltage circuits.
• Plug for optional external GPS receiver  (only with Arduino Mega).
• IR receiver TSOP4836 for optional IR remote controllers (In case of using Arduino UNO, they may conflict with “Tone” library). If you plan to use remote control, we strongly recommend the using of Arduino MEGA – works fluently.
• 3 pin connector for optional Temperature sensor (DS18B20; 1-Wire protocol).
• SPI up to 4Mhz.
• Places for 3 column with 2 neon dots (digits separator).
• Independent controls for upper and lower dots.
• Power consumption: 12V, 760mA. Recommended: 12 VDC, not less than 1A. Power supply connector dimensions: 5.5 x 2.1mm (center pin positive “+”).
• Reverse polarity protection.
• Nixie Tubes Shield NCS314-8C Clock size: 336 mm x 90 mm x 78 mm

IN-14+IN-19A Arduino Shield Nixie Tubes Clock by GRA & AFCH

Operating Instruction