DIY KIT for IN-14 Nixie Tubes Clock [RGB, USB, Musical] [Tubes, Sockets, Column, Power Supply] [Temp. sensor] [4 TUBES] [BLACK GOLD BOARD]

Units Sold: 1

 

Project “Divergence Meter mini”
DIY KIT for IN-14 Nixie Tubes Clock with Sockets
Nixie Tubes Clock with Column on Black Gold Board
Designed for 4 IN-14 xUSSR Nixie Tubes
IN-14 Tubes are the most popular mass-produced Nixie Tubes
Nixie Clocks are one of the most beautiful and popular Vintage Clocks
Clock features Startup Tune, RGB backlight, USB port for updates
Nixie Tubes Clock options include Tubes, Sockets, Column, Power Supply
Pluggable Accessories include compact external Temperature sensor
Nixie Clock is fully compatible with Arduino platform program codes
It allows you to write your own unique programs for the Arduino platform
All the latest Source codes are always available on our GitHub channel
PCB, Design, Schematics, Case and Software made by GRA & AFCH

 

 

$69.95$189.95

Clear

DIY KIT for IN-14 Nixie Tubes Clock with Column and Sockets [4 TUBES] [BLACK GOLD BOARD]

 

Project “Divergence Meter mini”
DIY KIT for IN-14 Nixie Tubes Clock with Sockets
Nixie Tubes Clock with Column on Black Gold Board
Designed for 4 IN-14 xUSSR Nixie Tubes
IN-14 Tubes are the most popular mass-produced Nixie Tubes
Nixie Clocks are one of the most beautiful and popular Vintage Clocks
Clock features Startup Tune, RGB backlight, USB port for updates
Nixie Tubes Clock options include Tubes, Sockets, Column, Power Supply
Pluggable Accessories include compact external Temperature sensor
Nixie Clock is fully compatible with Arduino platform program codes
It allows you to write your own unique programs for the Arduino platform
All the latest Source codes are always available on our GitHub channel
PCB, Design, Schematics, Case and Software made by GRA & AFCH

 

 

 

 

Listing includes:

 

  • Tubes NCT414-4 and Control NCM109 Boards Bare PCBs
  • Set of Electronic Parts and Components for NCT414-4 and NCM109 Boards
  • Set of Hex Spacers and Screws for NCT414-4 and NCM109 Boards
  • Set of Socket Pins for 4 IN-14 Nixie Tubes (optional, choose in selector)
  • NE2H Neon Bulb for Dot (one Neon for Dot and one spare)
  • IN-14 Nixie Tubes – 4 pcs Set (optional, choose in selector)
  • Column with Dots (optional, choose in selector)
  • Temperature sensor (DS18B20) (optional, external with jack 3.5 mm)
  • Power Supply (12V, 1A) (US, EU, UK, AU) (optional AC plug, choose in selector)
  • Principal Electrical Schemes for NCT414 and NCM109 Boards
  • BOM Lists for NCT414 and NCM109 Boards
  • User Manual on vintage style paper

 

Sockets pins are optional for the Nixie Board

Column with separating Dots is optional for the KIT

Temperature sensor with jack 3.5 mm is optional for the KIT

Power Supply is optional for the KIT

 

 

 

We offer optional Accessories for Nixie Clocks:

 

 

Dear customers!
If you have ANY questions, PLEASE ASK us.

 

 

Our Benefits:

 

  • All our Nixie Tubes Clocks are using HV513WG chips,
    it provides higher brightness in multiplexing mode in comparison with HV5812 chip and greater reliability compared to legacy K155ID1
  • We offer flexible Tubes Boards platform, that support many Nixie Tubes
    (out Tubes Boards designed for IN-4, IN-8, IN-8-2, IN-12, IN-14, IN-16, IN-17, IN-18 and Z573, Z5660M, ZM1042, Z568M Nixie Tubes)
  • It is easy to build a beautiful Nixie Tubes Clock with our Boards, we also offer Acrylic, Wooden and Stone Cases for our Clocks
  • Fast uploading pf the Firmware via USB to the Control Board
  • All the latest version of the Firmwares to all our Nixie Clocks are always available on our GitHub channel
  • No need for additional drivers, we are using only genuine USB-to-serial converters (FTDI),
    drivers for them are pre-installed in all popular OSes: Windows, MacOS, Linux
  • It is easy to modify the Nixie Clock’s Firmware functions for your tasks due to the open Arduino platform
  • We use High Quality PCBs and Components, also we use Japanese aluminum capacitors only for our Boards (Nichicon, Panasonic)
  • Tubes Board is easy to modify by cutting if you want to build 4 Tubes Clock [HH:MM] from 6 Tubes Clock
  • Our Nixie Boards use Power On Self-Test (POST): LED backlight flashing,Tubes flashing and Start up Tune. Our Boards use,
    Firmware version can be seen at the end of the POST test
  • Our Tubes Boards use Unique detailed Tube test – our soft test checks each Tubes segment on every Tube so it distinguishable to see segments failures
  • We provide competent technical support for all our products

 

 

Software Features:

 

  • Clock support many kinds of Nixie tubes (4 tubes [hh:mm] format).
  • 12/24 hour format.
  • Date format: MM:YY
  • Unique RGB LEDs backlight with 16,7 million colors.
  • Very easy to switch LEDS off/on or set desired color.
  • As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it. (included songs: mission impossible, we wish you).
  • Easy updating firmware via USB using Arduino IDE.
  • Software based on Arduino sketch, so MCU has Arduino bootloader within.
  • Power On Self-Test (POST): LEDs test, tubes test, input voltage test, sound test.
  • Keep time counting until power off.
  • All setting stored to non-volatile memory

 

 

Hardware Features:

 

  • Integrated High Voltage Power supply 150 – 220V.
  • ICSP connector for flashing Arduino Bootloader to blank MCU.
  • 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (see manual).
  • Test points for testing, adjust and control low and high voltage circuits.
  • Pads for internal buttons and terminals for external buttons.
  • Pads for internal USB connector and terminals for external USB.
  • Terminals for internal and external power connector.
  • Terminals for external and internal buzzer.
  • 2 dots column with separate controls upper and lower dots.
  • Power consumption: 11-14V, 360mA (Recommended power source: voltage 12V, current 1-2A).
  • MCU board NCM109 has world smallest size: 100 mm x 50 mm
  • Tubes board NCT4573 size: 150 mm x 50 mm

 

 

 

*The MCU board support a variety of tubes, such: ZM1042, Z522M, Z566M, Z5220M, ZM1040, Z5660M, B566M, LC-631, IN-14, IN-18, IN-12, IN-8, IN-7, IN-1, IN-2, IN-4, IN-8, IN-15, IN-16, IN-17. To use this tubes You need appropriate tubes PCB(s)

 

 

Reference pictures of the KIT:

 

Actual photo of the NCT414-4+NCM109 DIY KIT:

 

NCT414-4 bare Board top side:

 

NCT414-4 bare Board bottom side:

 

NCT414-4 assembled Board top side:

 

NCT414-4 assembled Board bottom side:

 

 

 

Control Board References:

 

NCM109 bare Board top side:

 

NCM109 bare Board bottom side:

 

NCM109 assembled Board top side:

 

NCM109 assembled Board bottom side:

 

 

Control Board charts:

 

 

 

Boards 2D and 3D views and dimensions:

 

NCT414-4 Board dimensions:

 

NCM109 Board 2D view top side:

 

NCM109 Board 2D view bottom side:

 

NCM109 Board dimensions:

 

 

IN-14 Nixie Tubes Clock DIY KIT NCT414-4 and NCM109 Boards BOM Lists:

 

NCT414-4 Tubes Board Bill of Materials List:

 

NCM109 Control Board Bill of Materials List:

 

 

IN-14 Nixie Tubes Clock DIY KIT NCT414-4 and NCM109 Boards Electrical Schemes:

 

NCT414-4 Tubes Board Principal Electrical Scheme:

 

NCM109 Control Board Principal Electrical Scheme:

 

 

IN-14 Nixie Tubes Clock with Column and Sockets with 4 TUBES BLACK GOLD BOARD by GRA & AFCH

 

IN-14 Nixie Tubes Clock without Column without Sockets:

 

 

IN-14 Nixie Tubes Clock with Column without Sockets:

 

 

IN-14 Nixie Tubes Clock without Column with Sockets:

 

 

IN-14 Nixie Tubes Clock with Column with Sockets:

 

 

Operating Instruction

 

 

Dear customers!
If you have ANY questions, PLEASE ASK us.

 

Shipping and Return information

 

All Items are shipped from Ukraine
Via International registered Airmail
Shipments are made within 1 business day
After the payments are received and verified
It takes about 4-7 days via UPS Express delivery
It takes about 10-18 days via Standard shipping
It takes about 35-45 days via Economy shipping
We combine multiple Items to save on shipping

 

 

 

UPS Express Shipping time (recommended):

Europe: 3-5 days
Germany: 3-5 days
USA, Canada: 4-7 days
Asia, South America: 5-7 days
Australia, New Zealand: 5-7 days
Africa, Central America: 5-7 days

 

 

Standard Shipping time:

Europe: 10-12 days
Germany: 10-12 days
USA, Canada: 10-15 days
Asia, South America: 10-18 days
Australia, New Zealand: 12-18 days
Africa, Central America: 12-18 days

 

 

Economy Shipping time:

Europe: 25-30 days
Germany: 25-30 days
USA, Canada: 30-35 days
Asia, South America: 35-45 days
Australia, New Zealand: 45-55 days
Africa, Central America: 45-55 days

 

 

Return Policy

All Returns are accepted

  • For Return you should contact Us within 14 Days after receiving the Item
  • Refunds are made as Money back or Replacements (buyer’s choice)
  • Return Shipments are paid by the buyer
  • No restocking fees are charged

 

 

Customs Policy

We as a seller do not receive from the buyer any charges any sales taxes and handling fees.
In any case we are not responsible for Tax(VAT) or any other Import duties or any other equivalent fees that arises upon delivery.
Please consult with your local Customs legislation and visit your local Customs department or website before making any purchases.

 

 

Downloads

 

Operating Instruction: IN-14 Nixie Tubes Clock [Black Boards] [4 Tubes]

Tubes Board files repository: IN-14 Nixie Clock NCT414-4 Series Tubes Board
Control Board files repository: Nixie Clock NCM109 Series Control Board

Firmware repository: IN-14 Nixie Tubes Clock [Black Boards] [4 Tubes]

NCM Drivers repository: Nixie Tubes Clocks USB drivers

 


 

You may also like…