Custom IR buttons on/off for tubes Nixie Tubes Clocks, Arduino Shield Clocks, Raspberry Pi HAT Clocks, DIY KITs, Cases for Clocks, RF Units, Nixie Tubes, Assembled Boars, Bare PCBs, Components, Spare Parts, Circuits and Firmwares… › Forums › Questions and answers about PRODUCTS › Custom IR buttons on/off for tubes This topic contains 1 reply, has 1 voice, and was last updated by bobsalt 1 week, 6 days ago. Viewing 2 posts - 1 through 2 (of 2 total) Author Posts 06.04.2021 at 21:46 #38260 bobsaltParticipant Howdy All! Has anyone added custom IR codes to the N-14 Arduino Shield Nixie Tubes Clock arduino ino? I’d like to be able to turn the tubes off using an IR blaster from a rpi4. This worked perfect with gra-afch’s older in-12 clocks as shown here on my last project.. https://old.reddit.com/r/raspberry_pi/comments/8ihxp5/mothers_day_gift_to_my_wife_pi_alarmclock_sound/ Seems like you should be able to add the power button under #define IR_BUTTON_MODE_CODE 0xxxxx in the ino then something in the doIndication314_HW2.x.ino file? or even use the long press for the up button to turn the tubes off? This topic was modified 1 week, 6 days ago by bobsalt. 07.04.2021 at 00:54 #38262 bobsaltParticipant edit: sorry, I thought I had used a gra-afch clock in that project, it was from a different source. question still stands though! How can I use IR to turn the tubes/leds off? Author Posts Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic.