Fried resistor

Nixie Tubes Clocks | Shields for Arduino Clocks | Raspberry Pi HAT Nixie Clocks | DIY KITs for Nixie Clocks | Cases for Nixie Clocks | Nixie Tubes | RF Units | Assembled Boards | Bare PCBs | Components | Spare Parts | Circuits | Firmwares… › Forums › Questions and answers about PRODUCTS › Fried resistor

This topic contains 1 reply, has 2 voices, and was last updated by  Gra Afch 4 years ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 19.04.2020 at 01:45 #29126

    awalls
    Participant

    I have just assembled my NCM109. As soon as I powered up for the initial power voltage level checks, resistor R2 started glowing. What do you recommend I do now? Is it likely to have killed more components than just that resistor? Does the replacement resistor need to have a high voltage specification?

    In-circuit, this cluster of resistor readings are now
    r1,r3,r5 = 10k
    r2 = 100
    r4 = 160k
    r6 = 170k

    22.04.2020 at 18:36 #29280

    Gra Afch
    Keymaster

    Hello.

    Please write back to fominalec@gmail.com and add pictures of your assembly for checking it for errors.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.