NCM109 Wifi

Nixie Tubes Clocks | Shields for Arduino Clocks | Raspberry Pi HAT Nixie Clocks | DIY KITs for Nixie Clocks | Cases for Nixie Clocks | Nixie Tubes | RF Units | Assembled Boards | Bare PCBs | Components | Spare Parts | Circuits | Firmwares… › Forums › Questions and answers about PRODUCTS › NCM109 Wifi

Tagged: 

This topic contains 1 reply, has 2 voices, and was last updated by  Gra Afch 4 years, 2 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 30.01.2020 at 18:12 #27187

    amseedorf
    Participant

    Hi,
    I’ve bought two IN-8 Nixie clocks with NCM109, so i want to ask:
    is there any chance with an esp8266 board to add wifi to this PCB?
    It would be great to sync the clock with a ntp-server, or to control leds via wifi/browser

    regards
    Alex Seedorf

    31.01.2020 at 14:00 #27190

    Gra Afch
    Keymaster

    Hello Alex.

    Unfortunately the limitations of the processor for this Board (Atmega328P) does not allows to add more functionality such as NTP sync and others.
    If you are capable of working with Atmega code, you do you own development and try to widen functionality.
    This platform is compatible with Arduino platform and it is opensource.
    Feel free to use our code from our GitHub repository.

    If there will be any other questions, feel free to ask.
    Regards.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.