Nixie clock does not start anymore

Nixie Tubes Clocks | Shields for Arduino Clocks | Raspberry Pi HAT Nixie Clocks | DIY KITs for Nixie Clocks | Cases for Nixie Clocks | Nixie Tubes | RF Units | Assembled Boards | Bare PCBs | Components | Spare Parts | Circuits | Firmwares… › Forums › Questions and answers about PRODUCTS › Nixie clock does not start anymore

Tagged: 

This topic contains 2 replies, has 2 voices, and was last updated by  3e17463e-5203-4ed2-a038-9224947c585f 3 years, 7 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 17.09.2020 at 17:31 #33870

    3e17463e-5203-4ed2-a038-9224947c585f
    Participant

    The Arduino based clock I received as present does not start anymore.
    Instead, when I plug in the power cord, the following happens:

    Could you please help? Thank you.

    18.09.2020 at 15:31 #33951

    Gra Afch
    Keymaster

    Hello.

    It seems like the Power Supply is weak.
    You should try to Power it up from another one.
    You need to use 12V 1A Power Supply of good quality.

    Regards.

    20.09.2020 at 18:29 #33956

    3e17463e-5203-4ed2-a038-9224947c585f
    Participant

    Hello, thank you for your reply.
    Would you have a recommended model for the power supply?
    I am currently using the one provided with the clock.

    Best Regards.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.