Raspberry Pi: w1_master_driver … is not registered.

[dtParticipant]

The Raspberry Pi that is driving the Nixie Clock keeps on getting this error message …

What do I need to do to stop this being logged every 30 seconds?

root@nixie:/var/log# tail -25  syslog
Feb 12 20:37:23 nixie kernel: [83908.458094] w1_master_driver w1_bus_master1: Attaching one wire slave 00.b26000000000 crc d4
Feb 12 20:37:23 nixie kernel: [83908.463148] w1_master_driver w1_bus_master1: Family 0 for 00.b26000000000.d4 is not registered.
Feb 12 20:38:27 nixie kernel: [83973.178649] w1_master_driver w1_bus_master1: Attaching one wire slave 00.726000000000 crc 1e
Feb 12 20:38:27 nixie kernel: [83973.183636] w1_master_driver w1_bus_master1: Family 0 for 00.726000000000.1e is not registered.
Feb 12 20:39:06 nixie kernel: [84012.378542] w1_master_driver w1_bus_master1: Attaching one wire slave 00.f26000000000 crc 92
Feb 12 20:39:06 nixie kernel: [84012.383465] w1_master_driver w1_bus_master1: Family 0 for 00.f26000000000.92 is not registered.
Feb 12 20:39:56 nixie kernel: [84062.258756] w1_master_driver w1_bus_master1: Attaching one wire slave 00.0a6000000000 crc 24
Feb 12 20:39:56 nixie kernel: [84062.263757] w1_master_driver w1_bus_master1: Family 0 for 00.0a6000000000.24 is not registered.
Feb 12 20:40:37 nixie kernel: [84102.738968] w1_master_driver w1_bus_master1: Attaching one wire slave 00.8a6000000000 crc a8
Feb 12 20:40:37 nixie kernel: [84102.743880] w1_master_driver w1_bus_master1: Family 0 for 00.8a6000000000.a8 is not registered.
Feb 12 20:41:40 nixie kernel: [84166.339230] w1_master_driver w1_bus_master1: Attaching one wire slave 00.4a6000000000 crc 62
Feb 12 20:41:40 nixie kernel: [84166.344094] w1_master_driver w1_bus_master1: Family 0 for 00.4a6000000000.62 is not registered.
Feb 12 20:42:44 nixie kernel: [84229.939525] w1_master_driver w1_bus_master1: Attaching one wire slave 00.ca6000000000 crc ee
Feb 12 20:42:44 nixie kernel: [84229.944451] w1_master_driver w1_bus_master1: Family 0 for 00.ca6000000000.ee is not registered.
Feb 12 20:44:00 nixie kernel: [84306.059882] w1_master_driver w1_bus_master1: Attaching one wire slave 00.2a6000000000 crc 07
Feb 12 20:44:00 nixie kernel: [84306.064800] w1_master_driver w1_bus_master1: Family 0 for 00.2a6000000000.07 is not registered.
Feb 12 20:44:51 nixie kernel: [84356.820137] w1_master_driver w1_bus_master1: Attaching one wire slave 00.aa6000000000 crc 8b
Feb 12 20:44:51 nixie kernel: [84356.824996] w1_master_driver w1_bus_master1: Family 0 for 00.aa6000000000.8b is not registered.
Feb 12 20:45:29 nixie kernel: [84394.740311] w1_master_driver w1_bus_master1: Attaching one wire slave 00.6a6000000000 crc 41
Feb 12 20:45:29 nixie kernel: [84394.745194] w1_master_driver w1_bus_master1: Family 0 for 00.6a6000000000.41 is not registered.
Feb 12 20:46:22 nixie kernel: [84448.060576] w1_master_driver w1_bus_master1: Attaching one wire slave 00.ea6000000000 crc cd
Feb 12 20:46:22 nixie kernel: [84448.065425] w1_master_driver w1_bus_master1: Family 0 for 00.ea6000000000.cd is not registered.
Feb 12 20:47:13 nixie kernel: [84498.540823] w1_master_driver w1_bus_master1: Attaching one wire slave 00.1a6000000000 crc b9
Feb 12 20:47:13 nixie kernel: [84498.545693] w1_master_driver w1_bus_master1: Family 0 for 00.1a6000000000.b9 is not registered.
root@nixie:/var/log#

[David ReynoldsParticipant]

Do you have any 1-wire devices connected to your Pi? If not, just disable it

[dtParticipant]

The short answer is No.

I purchased the turnkey IN-14 Nixie with the Raspberry Pi.

There are no 1-wire devices I have added to the turnkey system.

I wasn’t sure if the Arduino Shield or the Pi uses the 1-wire.

I’ll disable the 1-wire … and see what happens…

What could go wrong?

Thank you,
-dt

[Author]

Posts