PRODUCTS
Showing 201–299 of 299 results
NIXIE CLOCKS IN CASES
NIXIE CLOCKS (NO CASES)
SHIELD FOR ARDUINO CLOCKS
RASPBERRY PI HAT CLOCKS
DIY KITS FOR NIXIE CLOCKS
BOARDS AND SHIELDS FOR NIXIE CLOCKS
BARE PCBS AND SETS OF PARTS FOR NIXIE CLOCKS
ARDUINO CONTROL BOARDS
CASES FOR NIXIE CLOCKS
POWER SUPPLIES
ACCESSORIES FOR CLOCKS
NIXIE TUBES
COMPONENTS
RF UNITS
POWER AUDIO AMPLIFIERS
POWER CORDS
WALKMAN PLAYERS
DISCOUNT PRODUCTS
VIRTUAL ITEMS
OTHER PRODUCTS
Set of metal plates for Wooden Case for clock on IN-18, Z566, ZM1042 Nixie tubes
Set of metal plates for Wooden Case for clock on IN-18, Z566, ZM1042 Nixie tubes
$50.00 Add to cart
Set of metal plates for Wooden Case for NCS314 shield
Set of metal plates for Wooden Case for NCS314 shield
$50.00 Add to cart
Set of Brass metal Rings for IN-18, Z5660M, Z566M, ZM1042 Nixie Tubes
Set of Brass metal Rings for IN-18, Z5660M, Z566M, ZM1042 Nixie Tubes
$44.95 – $64.95 Select optionsSet of Brass metal Rings for IN-14, IN-8, IN-8-2, Z570, Z573, LC531 Nixie Tubes
Set of Brass Rings for IN-14, IN-8, IN-8-2, Z570, Z573, LC531 Nixie Tubes
$34.95 – $49.95 Select options
RGB LEDs KT-SMD3528-RGB [10 pcs]
Set of RGB LEDs KT-SMD3528-RGB – 10 pcs.
$7.95 Add to cart
Coil Adjustable 455kHz
Coil Adjustable 455kHz
Similar to TOKO 7MC-8128Z for Quadrature FM, IF Transformer
$3.95 – $15.75 Select options
Coil 100 uH
Spare Coil 100 uH.
$4.95 Add to cart
$12.95 Add to cartK155ID1 (SN74141) Driver for Nixie Tubes [6 pcs] [used]
BCD Driver for Nixie Clocks
Genuine from Electron used$7.95 Add to cart
KM155ID1 (SN74141) Ceramic Case USSR Driver for Nixie Tubes [6 pcs]
Electron Driver for Nixie Clocks
Genuine from Electron$49.95 Add to cart
SN74141 (K155ID1) Texas Instruments Driver for Nixie Tubes [6 pcs] [used]
Texas Driver for Nixie Clocks
Genuine from Texas Instruments$49.95 Add to cart
MH74141 (K155ID1) Tesla Driver for Nixie Tubes [6 pcs] [used]
Tesla Driver for Nixie Clocks
Genuine from Tesla$49.95 Add to cart
ATMEGA328P-PU [Genuine Atmel]
Dip-28 8-bit Microcontroller with 4/8/16/32K Bytes In-System
Programmable Flash for Nixie Tubes Clocks Genuine Atmel$11.95 Select options
HV5122PJ [Genuine Microchip]
PLCC-44 32-Channel Serial To Parallel Converter
with Open Drain Outputs for Nixie Tubes Clocks
Genuine from Microchip$14.95 Add to cart
HV5222PJ (Mirrored HV5122PJ) [Genuine Microchip]
PLCC-44 32-Channel Serial To Parallel Converter
with Open Drain Outputs for Nixie Tubes Clocks
HV5122PJ mirrored version
Genuine from Microchip$14.95 Add to cart
HV513WG [Genuine Microchip]
24-Lead SOW (Wide Body) 8-Channel Serial to Parallel Converter
with High Voltage Push-Pull Outputs POL Hi-Z and Short Circuit Detect
for Nixie Tubes Clocks Genuine from Microchip$7.95 Add to cart
LM3488MM [Genuine]
VSSOP-8 High Efficiency Low-Side
N-Channel Controller for Switching Regulators
for Nixie Tubes Clocks Genuine$9.95 Add to cart
LM3478MA [Genuine]
MAX SOIC-8 High Efficiency Low-Side
N-Channel Controller for Switching Regulators
for Nixie Tubes Clocks Genuine$9.95 Add to cart
RT8258GE [Genuine]
SOT-23-6 1.2A 24V 700kHz Step-Down Converter
High Voltage Buck Converter for Nixie Tubes Clock Genuine$9.95 Add to cart
DS3231MZ [Genuine Maxim Integrated]
SOIC-8 I2C Real-Time Clock for Nixie Tubes Clocks
Genuine Maxim Integrated$19.95 Add to cart
DS3231SN [Genuine Maxim Integrated]
SOIC-16W Extremely Accurate I2C-Integrated
RTC/TCXO/Crystal for Nixie Tubes Clocks
Genuine Maxim Integrated$19.95 Add to cart
HV57708PG [Genuine]
PQFP-80 32 MHz 64-Channel Serial To Parallel Converter
with Push-Pull Outputs Driver for Nixie Tubes Clocks Genuine$24.95 Add to cart
$14.95 Add to cart
$9.95 Add to cart
CD4504BA [Genuine]
SOIC-16 CMOS to TTL Voltage-Level Shifter
5V to 12V for HV5122PJ/HV5222PJ Shift Registers
for use with Nixie Tubes Clocks Genuine$9.95 Add to cart
SN74ALVC164245DGGR [Genuine]
TTSOP-48 16-Bit 2.5-V to 3.3-V/3.3-V to 5-V
Level-Shifting Transceiver for Nixie Tubes Clocks Genuine$9.95 Add to cart
DS18B20 [Genuine]
TO-92 Programmable Resolution 1-Wire
Digital Temperature Sensor for Nixie Tubes Clocks Genuine$9.95 Add to cart
LP5907MFX-1.8 [Genuine]
SOT23-5 Ultra Low Noise 250-mA Linear Regulator
for RF and Analog Circuits for Nixie Tubes Clocks Genuine$9.95 Add to cart
LP5907MFX-3.3 [Genuine]
SOT23-5 Ultra Low Noise 250-mA Linear Regulator
for RF and Analog Circuits for Nixie Tubes Clocks Genuine$9.95 Add to cart
LD1117AS18TR [Genuine]
SOT233 Low Drop (LDO) Fixed and Adjustable
Positive Voltage Regulator for Nixie Tubes Clocks Genuine$9.95 Add to cart
LD1117AS33TR [Genuine]
SOT233 Low Drop (LDO) Fixed and Adjustable
Positive Voltage Regulator for Nixie Tubes Clocks Genuine$9.95 Add to cart
LD1117DTTR [Genuine]
DPAK Low Drop (LDO) Fixed and Adjustable
Positive Voltage Regulator for Nixie Tubes Clocks Genuine$9.95 Add to cart
$9.95 Add to cart
$9.95 Add to cart
TCXO 40MHz 1ppm 3.3V Clipped Sinus [Genuine]
3225 Quartz Crystal Oscillator
for Nixie Tubes Clocks Genuine$18.95 Select options
TSOP4836 [Genuine]
TSOP348 Photo Module for PCM
IR Remote Control System
for Nixie Tubes Clocks Genuine$9.95 Add to cart
$9.95 Add to cart
$9.95 Add to cart
$9.95 Add to cart
Quartz Crystal
Quartz Crystal 50MHz 1ppm 3.3V Clipped Sinus
16MHz 5032 5×3.2mm 2 Pins for Nixie Tubes Clocks$9.95 Add to cart
$9.95 Add to cart
$9.95 Add to cart
$9.95 Add to cart
FDD6N25 [Genuine]
D-PAK FDD6N25 250V MOSFET Transistor
for High Voltage DC/DC Driver
for Nixie Tubes Clocks Genuine$9.95 Add to cart
FQD10N20L [Genuine]
D-PAK FQD10N20L 200V MOSFET Transistor
for High Voltage DC/DC Driver
for Nixie Tubes Clocks Genuine$9.95 Add to cart
$9.95 Add to cart
$9.95 Add to cart
$9.95 Add to cart
$9.95 Add to cart
$9.95 Add to cart
$9.95 Add to cart
DDS AD9910 Shield for Arduino RF Signal Generator AM/FM/SWEEP [600 MHz, @1.5 GHz Core Clock, Low Spurs, Low Harmonic]
DDS (Direct Digital Synthesis) Analog Devices AD9910 Shield for Arduino
This device is designed to ensure seamless integration with Arduino MEGA 2560
It does not require any extra wires or converters to work properly
For maximum performance we recommend Ultra-low noise reference oscillator RCLN1000
All functions of the DDS AD9910 are brought to the contacts from the Arduino MEGA
With this you can fully reveal all the capabilities of the DDS AD9910 Shield
PCB Design Schematics Case and Software made by GRA & AFCH$199.95 – $279.95 Select options
DIY KIT for DDS AD9910 Shield for Arduino RF Signal Generator AM/FM/SWEEP [600 MHz, @1.5 GHz Core Clock, Low Spurs, Low Harmonic]
DIY KIT for DDS (Direct Digital Synthesis) Analog Devices AD9910 Arduino Shield
Easy connection to Arduino MEGA 2560 without additional wires and converters
For maximum performance we recommend Ultra-low noise reference oscillator RCLN1000
All functions of the DDS AD9910 are brought to the contacts of the Arduino MEGA
With this you can fully reveal all the capabilities of the DDS AD9910 Shield
PCB Design Schematics Case and Software made by GRA & AFCH$199.95 – $279.95 Select options
DDS AD9912 Arduino Shield RF Signal Generator, Sine-Wave, CMOS, HSTL [600 MHz, @1.3 GHz Core Clock, Low Spurs, Low Harmonic]
DDS (Direct Digital Synthesis) Analog Devices AD9912 Arduino Shield
Easy connection to Arduino MEGA 2560 without additional wires and converters
For maximum performance we recommend Ultra-low noise reference oscillator RCLN1000
All functions of the DDS AD9912 are brought to the contacts of the Arduino MEGA
With this you can fully reveal all the capabilities of the DDS AD9912 Shield
PCB Design Schematics Case and Software made by GRA & AFCH$199.95 – $279.95 Select options
DDS AD9959 Arduino Shield RF Signal Generator 4 Synchronized DDS Channels [225MHz, @600 MHz Core Clock, Low Spurs, Low Harmonic]
DDS (Direct Digital Synthesis) Analog Devices AD9959 4 Synchronized DDS Channels
Arduino Shield Easy connection to Arduino MEGA 2560 without additional wires and converters
All functions of the DDS AD9959 are brought to the contacts of the Arduino MEGA
With this you can fully reveal all the capabilities of the DDS AD9959 Shield
PCB, Design, Schematics, Case and Software made by GRA & AFCH$189.95 – $254.95 Select options
DIY KIT for DDS AD9959 Arduino Shield RF Signal Generator 4 Synchronized DDS Channels [225MHz, @600 MHz Core Clock, Low Spurs, Low Harmonic]
DIY KIT for DDS (Direct Digital Synthesis) Analog Devices AD9959 4 Synchronized DDS Channels
Arduino Shield Easy connection to Arduino MEGA 2560 without additional wires and converters
All functions of the DDS AD9959 are brought to the contacts of the Arduino MEGA
With this you can fully reveal all the capabilities of the DDS AD9959 Shield
PCB, Design, Schematics, Case and Software made by GRA & AFCH$189.95 – $254.95 Select options
DDS AD9914 Arduino Shield RF Signal Generator [1.4GHz @3.5GHz Core Clock, Low Spurs, Low Harmonic]
DDS (Direct Digital Synthesis) Analog Devices AD9914
Arduino Shield Easy connection to Arduino MEGA 2560 without additional wires and converters
All functions of the DDS AD9914 are brought to the contacts of the Arduino MEGA
With this you can fully reveal all the capabilities of the DDS AD9914 Shield
PCB, Design, Schematics, Case and Software made by GRA & AFCH$699.95 – $779.95 Select options
DDS AD9915 Arduino Shield RF Signal Generator [1GHz @3GHz Core Clock, Low Spurs, Low Harmonic]
DDS (Direct Digital Synthesis) Analog Devices AD9915
Arduino Shield Easy connection to Arduino MEGA 2560 without additional wires and converters
All functions of the DDS AD9915 are brought to the contacts of the Arduino MEGA
With this you can fully reveal all the capabilities of the DDS AD9915 Shield
PCB, Design, Schematics, Case and Software made by GRA & AFCH$599.95 – $679.95 Select options
1GHz Ultra Low Noise Reference Oscillator -131 dBc/Hz @ 10kHz RCLN1000 for AD9910 AD9912 Units
Ultra Low Noise Reference Oscillator RCLN1000
Reference Oscillator for DDS AD9910 DDS AD9912 Units
PCB Design Schematics Case and Software made by GRA & AFCH
$199.95 – $314.95 Select options
Band-Pass Filter BPF 7th Order 1-1000Mhz 433MHz 868MHz 915MHz 1GHz for RF Receiver Transmitter Amplifier Mixer Transceiver Antenna
A Band-Pass Filter or BandPass Filter (BPF)
It is a device that passes frequencies within a certain range
And it rejects (attenuates) frequencies outside that range
$34.95 – $69.95 Select options
Low-Pass Filter LPF 7th Order Elliptical 1-1000Mhz 3.5, 7, 14, 28, 144, 433MHz etc for RF Amlifier, Receiver, Transmitter, Mixer, Transceiver, Antenna.
Low-pass filter is a filter that passes signals with a frequency lower than a selected cutoff frequency and attenuates signals with frequencies higher than the cutoff frequency. These filters are usually applied after RF amplifiers (MMIC, Gain-block and Class C amplifiers) for suppression of high-order harmonics of radio-frequency signals, or placed at the mixer output to filter out high-frequency interference that plays a role in frequency selection.
$18.95 – $69.95 Select options
RF Amplifier 8-2000 MHz, GAIN = 20 dB, P = +20 dBm MMIC MRFA89 SOT-89 [GOLD PLATED]
MRFA89 RF Amplifier
The board has RF MMIC Amplifier in SOT-89 package (TQP369185 by defaults)
Our MRFA89 RF Amplifier also includes input/output DC blocking capacitor,
RF choke, bypass capacitors and 5V regulators in DPAK package.
SMA connectors used for input/output.
Size of the PCB 45x30mm, FR-4 material, double-sided with solid plated ground plane on the back.$19.95 Add to cart
DIY KIT for RF Amplifier 8-2000 MHz, GAIN = 20 dB, P = +20 dBm MMIC MRFA89 SOT-89
DIY KIT for MRFA89 RF Amplifier
The board has RF MMIC Amplifier in SOT-89 package (TQP369185 by default)
Our MRFA89 RF Amplifier also includes input/output DC coupling capacitor 0805 size,
RF choke and drop resistor, de-coupling capacitors and voltage regulators (78M05 for 5V in DPAK package).
SMA connectors used for input/output.
Size of the PCB 45x30mm, FR-4 material, double-sided with solid plated ground plane on the back.
$19.95 Add to cart
TAFM2833 144/100/76/74/72/50/36/27 MHz FM Transmitter in Compact Alluminum Case
TAFM2833 (TAFM) 144/100/76/74/7/50/36/27 MHz FM Transmitter
Transmitting Analog Frequency Modulation Device for use with Antenna
Compact FM Analog and Digital Transmitter in Alluminum Case
Transmitter is built on Motorola IC MC2833 with Bandpass filter
Device can be used to Transmit Analog and Digital SFK Signals
The Carrier Frequency can be one of 144/100/76/74/72/50/36/27 MHz
The Signal Modulation can be performed in Range of 20-10000 Hz
PCB, Design, Schematics, Case and Software made by GRA & AFCH$69.95 – $164.95 Select options
TAFM2833 144 MHz RF Transmitter in Compact Alluminum Case [with Antenna]
TAFM2833 (TAFM) 144 MHz Compact RF Transmitter
Transmitting Analog Frequency Modulation Device with Antenna
Compact RF Analog and Digital Transmitter in Alluminum Case
Transmitter is built on Motorola IC MC2833 with Bandpass filter
Device can be used to Transmit Analog and Digital SFK Signals
The Carrier Frequency is 144 MHz with Modulation in Range 20-10000 Hz
PCB, Design, Schematics, Case and Software made by GRA & AFCH$69.95 – $99.95 Select options
TAFM2833 144 MHz RF Transmitter [with Antenna]
TAFM2833 (TAFM) 144 MHz RF Transmitter
Transmitting Analog Frequency Modulation Device
Compact RF Analog and Digital Transmitter with Antenna
Transmitter is built on Motorola IC MC2833 with Bandpass filter
Device can be used to Transmit Analog and Digital SFK Signals
The Carrier Frequency is 144 MHz with Modulation in Range 20-10000 Hz
PCB, Design, Schematics, Case and Software made by GRA & AFCH$44.95 – $74.95 Select options
Antenna 144MHz 430MHz GENUINE NAGOYA NA-771 Dual Band SMA Female 10W for Baofeng UV5R UV-82
Antenna 144MHz 430MHz
Nagoya Genuine Antenna NA-771
Dual Band SMA Female 10W for Baofeng UV5R UV-82
Produced at Nagoya REUEX Industrial CO LTD factory in Taiwan$14.95 Add to cart
VAT219 2-channel Vacuum Tube Power Amplifier
- 5 Watts x 2 Channels
- Display (2) IN-14, (1) IN-19A Nixie Tubes
- SRPP is fundamentally a push-pull power amplifier
- 2 x Output toroidal audio transformers
- (4) 6C19P, (2) 6H23P vacuum tubes
$850.00 Select options
DC Power Wires Leads Cords Cables Banana to Alligator 30A 12AWG 5FT 10 FT 1M 1.5M 2M 3M for Lab Power Supply High Current Series by GRA & AFCH
Power Cords appropriate for all Power Supplies
Both Power Cables/Leads has a 5 feet length
It is suitable for smallest 2A units and for the most powerful 30A
Cords apropriate for Models with BANANA Sockets for connectivity
Both Cords with Rated Current of 30 Amperes
Two Power Cords with Alligator Clips and Bannana Plugs
Power Cords made of high-quality copper 12 AWG (3.3 mm2)
Insulation made of ultra flexible silicon
Two Power Cords are each of 5 feet (1.5m) length
High Current Series by GRA & AFCH$19.50 – $49.95 Select options
Sony Walkman WM-DD9 Very RARE Cassette Player EXCELLENT condition (Serial Number S/N 60748)
TOP OF THE RANGE SONY WALKMAN WM-DD9
The WM-DD9 is considered by many the finest Walkman Sony ever made
$3,799.95 Add to cart
Sony Walkman WM-DD10 Red Cassette Player EXCELLENT condition (Serial Number S/N 84375)
Sony Walkman WM-DD10 Red Cassette Player
$299.95 Read more
Sony Walkman WM-DD33 Player Cassette Player EXELLENT WORK Black Serial No 258873
Sony Walkman WM-DD33 Cassette Player
$349.95 Add to cart
Sony Walkman WM-DD33 Cassette Player EXCELLENT condition (Serial Number S/N 129314)
Sony Walkman WM-DD33 Cassette Player
$449.95 Read more
Sony Walkman WM-DC2 Cassette Player AMORPHOUS HEAD EXCELLENT WORK Condition (Serial Number 530895)
Sony WM-DC2 Walkman Cassette Player
AMORPHOUS HEAD GOOD WORK Condition
Super Rare to find an original model Serial # 530895
$1,399.95 Add to cart
Sony Walkman WM-DD Cassette Player EXCELLENT WORK
Sony Walkman WM-DD Player
Cassette Player EXCELLENT CONDITION AND WORK
$399.95 Add to cart
Sony Walkman WM-DD1 Silver case EXCELLENT WORK Condition
The Sony Walkman WM-DD1 (DD stands for Direct Drive)
$499.95 Add to cart
Sony Walkman WM-DD1 Black EXCELLENT WORKING Condition
The Sony Walkman WM-DD1 (DD stands for Direct Drive)
$499.95 Add to cart
Sony Walkman WM-DD1 Silver GOOD WORKING Condition
The Sony Walkman WM-DD1 (DD stands for Direct Drive)
$279.95 Add to cart
Sony Walkman WM-DD2 Cassette Player EXCELLENT WORK
Sony Walkman WM-DD2 Player
Cassette Player EXCELLENT CONDITION AND WORK
$499.95 Add to cart
Sony Walkman WM-DD2 Cassette Player EXCELLENT WORK Black
Sony Walkman WM-DD2 Player Black
Cassette Player ECXELLENT CONDITION AND WORK
$449.95 Add to cart
Sony Walkman WM-DD2 Cassette Player Red Metal case GOOD WORKING CONDITION
Sony Walkman WM-DD2 Player Red case
Cassette Player in GOOD CONDITION AND WORK
$499.95 Read more
Sony Walkman WM-DD2 Cassette Player Silver Metal Case GOOD WORKING CONDITION
Sony Walkman WM-DD2 Player Silver case
Cassette Player in GOOD CONDITION AND WORK
$399.95 Add to cart
Sony Walkman WM-DD3 Cassette Player EXCELLENT WORK Black Serial # 92353
Sony Walkman WM-DD3 Player Black
Cassette Player ECXELLENT CONDITION AND WORK
$329.95 Add to cart
Sony Walkman WM-DD10 Red case EXCELLENT WORK Condition
The Sony Walkman WM-DD10 (DD stands for Direct Drive)
$249.95 Add to cart
Sony Walkman WM-DD10 Black case EXCELLENT WORK Condition
The Sony Walkman WM-DD10 (DD stands for Direct Drive)
$499.95 Add to cart
$299.95 Add to cart
Sony Walkman WM-DD22 Metal case EXCELLENT WORK Condition
The Sony Walkman DD Quartz WM-DD22 (DD stands for Direct Drive)
$399.95 Add to cart
Sony Walkman DD2 Original Leather Case USED in EXCELLENT condition
Sony Walkman DD1 DD10 DD11 DD22 Original Leather Case
$49.95 Add to cart
Sony Walkman D-NE720 Personal CD Player EXCELLENT WORK Condition
You are bidding on a Sony Walkman D-NE720 Personal CD Player
Includes player and AA battery holder, it is tested and working
$249.95 Add to cart
Sony Walkman DD1 DD10 DD11 DD22 Original Leather Case USED in EXCELLENT condition
Sony Walkman DD1 DD10 DD11 DD22 Original Leather Case
$49.95 Add to cart
Sony Walkman DD1 DD10 DD11 DD22 Original Leather Case USED in GOOD condition
Sony Walkman DD1 DD10 DD11 DD22 Original Leather Case
$29.95 Read more
Sony Walkman KRC-DD2-DC2 WM-DD2 and WM-DC2 Complete Capacitors Replacement KIT
Complete Capacitors Replacement KIT
If your player has no sound or sound is distorted
In most cases replacing the Capacitors will solve this problem
$24.95 Add to cart
Sony Walkman KRC-1-11 WM-DD1 and WM-DD11 Complete Capacitors Replacement KIT
Complete Capacitors Replacement KIT
If your player has no sound or sound is distorted
In most cases replacing the Capacitors will solve this problem
$25.95 Add to cart
Sony Walkman WM DD New Center Gear Repair KIT it solves Center Gear crack problem
NEW CENTER GEAR REPAIR KIT FOR SONY WALKMAN DD
This KIT solves famous center gear crack problem
Now anyone can fix the gear himself quickly and easily
There is no need to remove gear with metal disc from it’s arm$49.95 Add to cart
Spring for Open Switch for Sony WM-DD DD1 DD2 DD3 DD10 DC2 Players
Spring for OPEN Switch for Sony WM-DD DD1 DD2 DD3 DD10 DC2 Players
$14.95 Add to cart
Acrylic Case for IN-14 Arduino Shield Nixie Tubes Clock
Beautiful Acrylic Case for IN-14 Shield Nixie Tubes Clock
Case has some minor scuffs and a few scratches
$19.95 – $49.95 Select optionsRecommended
-
IN-18 Nixie Clock with Sockets and Columns in a Vintage Ashwood Case [SMF, RGB, USB, Tunes] (Tubes) [with Temp. sensor] (with Power Supply) [8 Tubes]
$479.95 – $1,599.95
-
IN-18 Nixie Clock with Sockets and Columns in Artistic synthetic Granite Case [SMF, RGB, USB, Tunes] (Tubes) (Temp. sensor, GPS Receiver, IR Receiver, IR Remote) (with Power Supply)
$489.95 – $1,244.95
-
IN-18 Shield Nixie Clock with Sockets and Columns in a Vintage Ashwood Case [SMF, RGB, USB, Tunes] (Tubes) (with Arduino) (Temp. sensor, GPS Receiver, IR Receiver, IR Remote) (with Power Supply)
$339.95 – $1,094.95
-
IN-18 Shield Nixie Clock with Sockets and Column in a Vintage Ashwood Case [SMF, RGB, USB, Tunes] (Tubes) (with Arduino) (Temp. sensor, GPS Receiver, IR Receiver, IR Remote) (with Power Supply) [4 Tubes]
$279.95 – $814.95
-
IN-18 Shield Nixie Clock with Sockets and Columns in a Clear Acrylic Case [SMF, RGB, USB, Tunes] (Tubes) (with Arduino) (Temp. sensor, GPS Receiver, IR Remote) (with Power Supply)
$229.95 – $974.95
-
IN-18 Shield Nixie Clock with Sockets and Column in a Stylish Black Acrylic Case [SMF, RGB, USB, Tunes] (Tubes) (with Arduino) (Temp. sensor, GPS Receiver, IR Remote) (with Power Supply) [4 Tubes]
$179.95 – $694.95
-
IN-18 Shield Nixie Clock with Sockets and Column in Compact Black Acrylic Case [SMF, RGB, USB, Tunes] (Tubes) (with Arduino) (Temp. sensor, GPS Receiver, IR Remote) (with Power Supply) [4 Tubes]
$164.95 – $679.95
-
IN-12 Shield Nixie Clock with Sockets and Dots in a Stylish Black Acrylic Case [SMF, RGB, USB, Tunes] (Tubes) (with Arduino) (Temp. sensor, GPS Receiver, IR Remote) (with Power Supply)
$149.95 – $234.95
-
IN-12 Nixie Clock with Sockets and Dots in a Noble Oakwood Case [SMF, RGB, USB, Tunes] (Tubes) (Temp. sensor) (with Power Supply]
$259.95 – $309.95
-
IN-12 Nixie Clock with Sockets and Dots in a Brushed Oakwood Case [SMF, RGB, USB, Tunes] (Tubes) (Temp. sensor) (with Power Supply]
$259.95 – $309.95
-
IN-12 Nixie Clock with Sockets and Dots in a Clear Acrylic Case [SMF, RGB, USB, Tunes] (Tubes) (Temp. sensor) (with Power Supply)
$149.95 – $199.95
-
IN-14 Shield Nixie Clock with Dots [SMF, RGB, USB, Tunes] (Tubes) (Sockets, Columns) (with Arduino) (Temp. sensor, GPS Receiver, IR Remote) (Power Supply)
$109.95 – $289.95
-
IN-18 Shield Nixie Clock with Sockets and Dots [SMF, RGB, USB, Tunes] (Tubes) (Columns) (with Arduino) (Temp. sensor, GPS Receiver, IR Remote) (Power Supply)
$144.95 – $929.95
-
Z5660M Shield Nixie Clock with Sockets and Dots [SMF, RGB, USB, Tunes] (Tubes) (Columns) (with Arduino) (Temp. sensor, GPS Receiver, IR Remote) (Power Supply)
$144.95 – $689.95
-
IN-14 Shield Nixie Clock with Dot(s) [SMF, RGB, USB, Tunes] (Tubes) (Sockets, Column) (with Arduino) (Temp. sensor, GPS Receiver, IR Remote) (Power Supply) [4 Tubes]
$89.95 – $224.95